The Influence of Different Occlusal Loading on Six Restorative Materials for Restoration of Abfraction Lesions—Finite Element Analysis release_ucxrf27q2rbsfmrkcrcnhwv6nu

by Selma Jakupovic, Adnan Sehic, Fuad Julardžija, Alma Gavranovic-Glamoc, Sofić Amela, Anita Bajsman, Lejla Kazazić

Published in European Journal of Dentistry by Georg Thieme Verlag KG.

2022   Volume 16, Issue 4, p886-894

Abstract

<jats:title>Abstract</jats:title> Objectives The aim of the study was to analyze the occurrence of stress on teeth with abfraction lesions restored with six different restorative materials, and by introducing the tensile strength parameters to calculate the safety factor of the material under the load (ratio between the strength of the material and the maximum stress). Materials and Methods Three-dimensional models of the mandibular premolar are created from a microcomputed tomography images. An abfraction lesion is modeled on the tooth. The stress of the dental tissues and six restorative materials under functional and nonfunctional occlusal loading of 200 (N) are analyzed by finite element method. Statistical Analysis CTAn program 1.10 and ANSYS Workbench (version 14.0) were used for analysis. Results are presented in von Mises stress. Results Oblique loads caused ≈ four times higher stress in restorative materials than the axial ones. It is noticeable that high values of von Mises stress are measured at the bottom of the sharp lesion, even up to 240 MPa, that are significantly reduced after the restoration. The highest stresses at the restorative material are present at the lower (gingival) margin of the restoration. The highest stresses under both types of loads are measured in nanohybrid composite (Tetric EvoCeram, Ivoclar Vivadent). The lowest values of the stress are measured in the flowable composite (Tetric Flow, Ivoclar Vivadent), but at the same time, the highest value of the stress is measured in the surrounding dental tissues on the tooth restored with the flowable composite. The microhybrid composite (Herculite XR, Kerr), with the highest safety factor, is the material that best withstands the stresses it is exposed to. The obtained safety factor did not exceed the critical limit, except for the glass ionomer cement, with the safety factor lower than 1. Conclusion The type of tooth loading has the greatest influence on the intensity of stress. The value of the obtained stresses in the restorative material and dental tissues differ due to the different mechanical properties of the materials. Restoration of noncarious lesions significantly reduces extremely high stress values at their bottom.
In application/xml+jats format

Archived Files and Locations

application/pdf  8.2 MB
file_kpxmewjokjgbvcdwuitdgdjur4
www.thieme-connect.de (publisher)
web.archive.org (webarchive)
Read Archived PDF
Preserved and Accessible
Type  article-journal
Stage   published
Date   2022-03-13
Language   en ?
Journal Metadata
Not in DOAJ
In Keepers Registry
ISSN-L:  1305-7456
Work Entity
access all versions, variants, and formats of this works (eg, pre-prints)
Catalog Record
Revision: 95633c6c-c3e0-4b0c-8b57-62acfdacda61
API URL: JSON