Application of Acoustic Signals for Rectifier Fault Detection in Brushless Synchronous Generator release_q4nqtqs2mzazxo6sdwa5ac6i6e

Abstract

One of the most important issues that power companies face when trying to reduce time and cost maintenance is condition monitoring. In electricity market worldwide, a significant amount of electrical energy is produced by synchronous machines. One type of these machines is brushless synchronous generators in which the rectifier bridge is mounted on rotating shafts. Since bridge terminals are not accessible in this type of generators, it is difficult to detect the possible faults on the rectifier bridge. Therefore, in this paper, a method is proposed to facilitate the rectifier fault detection. The proposed method is then evaluated by applying two conventional kinds of faults on rectifier bridges including one diode open-circuit and two diode open-circuit (one phase open-circuit of the armature winding in the auxiliary generator in experimental set). To extract suitable features for fault detection, the wavelet transform has been used on recorded audio signals. For classifying faulty and healthy states, K-Nearest Neighbours (KNN) supervised classification method was used. The results show a good accuracy of the proposed method.
In text/plain format

Published
Release Year 2019

Known Files and URLs

application/pdf  854.3 kB
sha1:158a2d0e856109bd3bb7...
web.archive.org (webarchive)
acoustics.ippt.pan.pl (web)
application/pdf  866.9 kB
sha1:c9767bfe09bdebe56a8c...
web.archive.org (webarchive)
journals.pan.pl (publisher)
Read Full Text
Type  article-journal
Stage   published
Year   2019
Work Entity
grouping other versions (eg, pre-print) and variants of this release
Fatcat Bits

State is "active". Revision:
2eda6c05-fe19-48a7-bed5-102d2009701a
As JSON object via API