EFFECT OF STRAIN RATE ON MICROSTRUCTURE OF A LOW CARBON STEEL WIRE
release_mcwkgu6vsng35gsk7ekhgfapde
by
A-N°34 Sciences & Technologie, Décembre
2011
Abstract
L'importance commerciale des aciers au carbone faiblement alliés est du à leurs propriétés de déformation plastique. Ces propriétés de déformation permettent à ces aciers d'être fabriquer sous forme de fils. Cette étude concerne un acier destiné au tréfilage, produit par Trifisoud-Setif-Algerie sous forme de barres et contient (%poids) 0.05%C ,0.3%Mn, 0.1%S et 0.12%Cr. L'analyse par microscopie optique et microscopie électronique à balayage (SEM) est utilisée pour identifier la microstructure du matériau dans les conditions de réception avant et après la déformation. Il a été mis en évidence que les propriétés mécaniques dépendent du taux de tréfilage (τ W). Les températures de recristallisation et la taille du grain sont déterminées et variaient avec τ W. Mots clés: Acier à bas carbone, déformation, tréfilage, microstructure, recristallisation. Abstract The commercial importance of low alloy carbon steels is due to their plastic deformation properties. These properties allow them to be formed into useful shapes such as wires. The present steel is produced by Trifisoud-Setif-Algeria and used for wiring. It is a low carbon steel wire containing mainly (weight %) 0.05%C, 0.3%Mn, 0.1%S and 0.12%Cr and is supplied as rods. The optical microscopic and SEM analyses are used to identify the microstructure of the material in as received and deformed conditions. It is found that tensile properties depend on the wiredrawing area reduction (τ w). The annealing temperatures and the grain size are determined; they also vary with τ w .
In text/plain
format
Archived Files and Locations
application/pdf 433.6 kB
file_agafirmeq5bzvanmotdcqmzhu4
|
web.archive.org (webarchive) revue.umc.edu.dz (web) |
article-journal
Stage
unknown
Year 2011
access all versions, variants, and formats of this works (eg, pre-prints)