Analysis of Densification Process and Structure of PM Al-Mg-Si-Cu-Fe and Al-Zn-Mg-Cu-Sn Alloys
release_lzrsbd4a65bd5oas246laibiiu
by
R. Bidulský, J. Bidulská, M. Actis Grande
Abstract
<jats:title>Abstract</jats:title>
The paper is focused on the role of the pressing pressure on the densification behaviour of PM aluminium alloys. Commercially aluminium based powders Al-Mg-Si-Cu-Fe and Al-Zn-Mg-Cu-Sn were used as materials to be investigated. The apparent density of the powder mixes was determined according to MPIF St. 04. A set of cylinder test specimen 55x10x10 mm<jats:sup>3 </jats:sup>was uniaxially pressed in a floating hardened steel die. Compaction pressures ranged from 50 MPa up to 700 MPa. Considering the densification of metal powders in uniaxial compaction, quantification of aluminium compaction behaviour was performed. The compressibility behaviour was evaluated, considering the effect on specimens, as well as on their microstructure. The development of compressibility values with pressing pressure enables to characterize the effect of particles geometry and matrix plasticity on the compaction process.
In application/xml+jats
format
Archived Files and Locations
application/pdf 1.1 MB
file_djt6wuviw5bp3a2vztkk7lvhvq
|
www.degruyter.com (web) web.archive.org (webarchive) |
application/pdf 1.1 MB
file_zj4imuk5znej3jec5xsuzfzbye
|
yadda.icm.edu.pl (web) web.archive.org (webarchive) |
application/pdf 1.1 MB
file_rmaiw7db5nhrhb2tnzou773nvi
|
web.archive.org (webarchive) content.sciendo.com (web) |
article-journal
Stage
published
Date 2014-03-01
Open Access Publication
In DOAJ
In ISSN ROAD
In Keepers Registry
ISSN-L:
1733-3490
access all versions, variants, and formats of this works (eg, pre-prints)
Crossref Metadata (via API)
Worldcat
SHERPA/RoMEO (journal policies)
wikidata.org
CORE.ac.uk
Semantic Scholar
Google Scholar