Manufacturing of spur gears having normal teeth on different pressure angles by module disc milling cutter release_jk2cwzviwbdibjf5pbmfanrq5i

by Dr. Sándor Bodzás

Published in International Review of Applied Sciences and Engineering by Akademiai Kiado Zrt..



<jats:title>Abstract</jats:title> The aim of this study is the manufacturing analysis of five spur gear pairs where the initial geometric parameters are the same only the pressure angle is different. Firstly, the gears must be designed and modelled. After that, I analyse the modification of this geometric parameter for the manufacturing parameters of the pinion and the gear in the case of gear cutting by module disc milling cutter. Using this technology the one tooth cutting can repeat from tooth to tooth in the function of the number of teeth. I would like to find correlations between the pressure angle and the manufacturing parameters. For this purpose, I define the initial technological parameters and calculate necessary technological parameters for the manufacturing process in a general way. I also define the manufacturing parameters for the given gear geometries. This analysis is practical and theoretical at the same time since the results and the process can help the manufacturing engineers to develop the gear manufacturing processes and applying my results for similar manufacturing problems.
In application/xml+jats format

Archived Files and Locations

application/pdf  3.8 MB
file_yqorma5axbht5pbhorc3cwkuuy (publisher) (webarchive)
Read Archived PDF
Preserved and Accessible
Type  article-journal
Stage   published
Date   2022-04-05
Container Metadata
Open Access Publication
In Keepers Registry
ISSN-L:  2062-0810
Work Entity
access all versions, variants, and formats of this works (eg, pre-prints)
Catalog Record
Revision: 4faf3875-3f62-465b-afd9-5ff9efce5530