The effect of heat recovery on the optimal values of helicopter turboshaft engine parameters release_i4cvuqxp2rc7dmsahnq7dqipj4

by H. H. Omar, V. S. Kuz'michev, A. O. Zagrebelnyi, V. A. Grigoriev

Published in VESTNIK of the Samara State Aerospace University by Samara State National Research University.

2020   Volume 19, p43-57

Abstract

Recent studies related to fuel economy in air transport conducted in our country and abroad show that the use of recuperative heat exchangers in aviation gas turbine engines can significantly, by up to 20...30%, reduce fuel consumption. Until recently, the use of cycles with heat recovery in aircraft gas turbine engines was restrained by a significant increase in the mass of the power plant due to the installation of a heat exchanger. Currently, there is a technological opportunity to create compact, light, high-efficiency heat exchangers for use on aircraft without compromising their performance. An important target in the design of engines with heat recovery is to select the parameters of the working process that provide maximum efficiency of the aircraft system. The article focused on setting of the optimization problem and the choice of rational parameters of the thermodynamic cycle parameters of a gas turbine engine with a recuperative heat exchanger. On the basis of the developed method of multi-criteria optimization the optimization of thermodynamic cycle parameters of a helicopter gas turbine engine with a ANSAT recuperative heat exchanger was carried out by means of numerical simulations according to such criteria as the total weight of the engine and fuel required for the flight, the specific fuel consumption of the aircraft for a ton- kilometer of the payload. The results of the optimization are presented in the article. The calculation of engine efficiency indicators was carried out on the basis of modeling the flight cycle of the helicopter, taking into account its aerodynamic characteristics. The developed mathematical model for calculating the mass of a compact heat exchanger, designed to solve optimization problems at the stage of conceptual design of the engine and simulation of the transport helicopter flight cycle is presented. The developed methods and models are implemented in the ASTRA program. It is shown that optimal parameters of the working process of a gas turbine engine with a free turbine and a recuperative heat exchanger depend significantly on the heat exchanger effectiveness. The possibility of increasing the efficiency of the engine due to heat regeneration is also shown.
In application/xml+jats format

Archived Files and Locations

application/pdf  941.2 kB
file_gmlonftoefhgpf4fxxkweppeyq
journals.ssau.ru (publisher)
web.archive.org (webarchive)
Read Archived PDF
Preserved and Accessible
Type  article-journal
Stage   published
Date   2020-12-31
Container Metadata
Open Access Publication
In DOAJ
Not in Keepers Registry
ISSN-L:  2542-0453
Work Entity
access all versions, variants, and formats of this works (eg, pre-prints)
Catalog Record
Revision: 797f1a6c-0485-45a3-a038-ee572241a908
API URL: JSON